All GNU programs should have the following targets in their Makefiles:
Compile the entire program. This should be the default target. This target need not rebuild any documentation files; Info files should normally be included in the distribution, and DVI (and other documentation format) files should be made only when explicitly asked for.
By default, the Make rules should compile and link with ‘-g’, so that executable programs have debugging symbols. Otherwise, you are essentially helpless in the face of a crash, and it is often far from easy to reproduce with a fresh build.
Compile the program and copy the executables, libraries, and so on to the file names where they should reside for actual use. If there is a simple test to verify that a program is properly installed, this target should run that test.
Do not strip executables when installing them. This helps eventual
debugging that may be needed later, and nowadays disk space is cheap
and dynamic loaders typically ensure debug sections are not loaded during
normal execution. Users that need stripped binaries may invoke the
install-strip target to do that.
If possible, write the
install target rule so that it does not
modify anything in the directory where the program was built, provided
‘make all’ has just been done. This is convenient for building the
program under one user name and installing it under another.
The commands should create all the directories in which files are to be
installed, if they don’t already exist. This includes the directories
specified as the values of the variables
exec_prefix, as well as all subdirectories that are needed.
One way to do this is by means of an
as described below.
Use ‘-’ before any command for installing a man page, so that
make will ignore any errors. This is in case there are systems
that don’t have the Unix man page documentation system installed.
The way to install Info files is to copy them into $(infodir)
$(INSTALL_DATA) (see Command Variables), and then run
install-info program if it is present.
is a program that edits the Info dir file to add or update the
menu entry for the given Info file; it is part of the Texinfo package.
Here is a sample rule to install an Info file that also tries to
handle some additional situations, such as
do-install-info: foo.info installdirs $(NORMAL_INSTALL) # Prefer an info file in . to one in srcdir. if test -f foo.info; then d=.; \ else d="$(srcdir)"; fi; \ $(INSTALL_DATA) $$d/foo.info \ "$(DESTDIR)$(infodir)/foo.info" # Run install-info only if it exists. # Use 'if' instead of just prepending '-' to the # line so we notice real errors from install-info. # Use '$(SHELL) -c' because some shells do not # fail gracefully when there is an unknown command. $(POST_INSTALL) if $(SHELL) -c 'install-info --version' \ >/dev/null 2>&1; then \ install-info --dir-file="$(DESTDIR)$(infodir)/dir" \ "$(DESTDIR)$(infodir)/foo.info"; \ else true; fi
When writing the
install target, you must classify all the
commands into three categories: normal ones, pre-installation
commands and post-installation commands. See Install Command Categories.
These targets install documentation in formats other than Info;
they’re intended to be called explicitly by the person installing the
package, if that format is desired. GNU prefers Info files, so these
must be installed by the
When you have many documentation files to install, we recommend that
you avoid collisions and clutter by arranging for these targets to
install in subdirectories of the appropriate installation directory,
htmldir. As one example, if your package has multiple
manuals, and you wish to install HTML documentation with many files
(such as the “split” mode output by
makeinfo --html), you’ll
certainly want to use subdirectories, or two nodes with the same name
in different manuals will overwrite each other.
Please make these
install-format targets invoke the
commands for the format target, for example, by making
format a dependency.
Delete all the installed files—the copies that the ‘install’ and ‘install-*’ targets create.
This rule should not modify the directories where compilation is done, only the directories where files are installed.
The uninstallation commands are divided into three categories, just like the installation commands. See Install Command Categories.
install, but strip the executable files while installing
them. In simple cases, this target can use the
install target in
a simple way:
install-strip: $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' \ install
But if the package installs scripts as well as real executables, the
install-strip target can’t just refer to the
target; it has to strip the executables but not the scripts.
install-strip should not strip the executables in the build
directory which are being copied for installation. It should only strip
the copies that are installed.
Normally we do not recommend stripping an executable unless you are sure the program has no bugs. However, it can be reasonable to install a stripped executable for actual execution while saving the unstripped executable elsewhere in case there is a bug.
Delete all files in the current directory that are normally created by building the program. Also delete files in other directories if they are created by this makefile. However, don’t delete the files that record the configuration. Also preserve files that could be made by building, but normally aren’t because the distribution comes with them. There is no need to delete parent directories that were created with ‘mkdir -p’, since they could have existed anyway.
Delete .dvi files here if they are not part of the distribution.
Delete all files in the current directory (or created by this makefile) that are created by configuring or building the program. If you have unpacked the source and built the program without creating any other files, ‘make distclean’ should leave only the files that were in the distribution. However, there is no need to delete parent directories that were created with ‘mkdir -p’, since they could have existed anyway.
Like ‘clean’, but may refrain from deleting a few files that people normally don’t want to recompile. For example, the ‘mostlyclean’ target for GCC does not delete libgcc.a, because recompiling it is rarely necessary and takes a lot of time.
Delete almost everything that can be reconstructed with this Makefile.
This typically includes everything deleted by
more: C source files produced by Bison, tags tables, Info files, and
The reason we say “almost everything” is that running the command
‘make maintainer-clean’ should not delete configure even
if configure can be remade using a rule in the Makefile. More
generally, ‘make maintainer-clean’ should not delete anything
that needs to exist in order to run configure and then begin to
build the program. Also, there is no need to delete parent
directories that were created with ‘mkdir -p’, since they could
have existed anyway. These are the only exceptions;
maintainer-clean should delete everything else that can be
The ‘maintainer-clean’ target is intended to be used by a maintainer of the package, not by ordinary users. You may need special tools to reconstruct some of the files that ‘make maintainer-clean’ deletes. Since these files are normally included in the distribution, we don’t take care to make them easy to reconstruct. If you find you need to unpack the full distribution again, don’t blame us.
To help make users aware of this, the commands for the special
maintainer-clean target should start with these two:
@echo 'This command is intended for maintainers to use; it' @echo 'deletes files that may need special tools to rebuild.'
Update a tags table for this program.
Generate any Info files needed. The best way to write the rules is as follows:
info: foo.info foo.info: foo.texi chap1.texi chap2.texi $(MAKEINFO) $(srcdir)/foo.texi
You must define the variable
MAKEINFO in the Makefile. It should
makeinfo program, which is part of the Texinfo
Normally a GNU distribution comes with Info files, and that means the Info files are present in the source directory. Therefore, the Make rule for an info file should update it in the source directory. When users build the package, ordinarily Make will not update the Info files because they will already be up to date.
Generate documentation files in the given format. These targets
should always exist, but any or all can be a no-op if the given output
format cannot be generated. These targets should not be dependencies
all target; the user must manually invoke them.
Here’s an example rule for generating DVI files from Texinfo:
dvi: foo.dvi foo.dvi: foo.texi chap1.texi chap2.texi $(TEXI2DVI) $(srcdir)/foo.texi
You must define the variable
TEXI2DVI in the Makefile. It
should run the program
texi2dvi, which is part of the Texinfo
texi2dvi uses TeX to do the real work of
formatting. TeX is not distributed with Texinfo.) Alternatively,
write only the dependencies, and allow GNU
make to provide the
Here’s another example, this one for generating HTML from Texinfo:
html: foo.html foo.html: foo.texi chap1.texi chap2.texi $(TEXI2HTML) $(srcdir)/foo.texi
Again, you would define the variable
TEXI2HTML in the Makefile;
for example, it might run
makeinfo --no-split --html
makeinfo is part of the Texinfo distribution).
Create a distribution tar file for this program. The tar file should be set up so that the file names in the tar file start with a subdirectory name which is the name of the package it is a distribution for. This name can include the version number.
For example, the distribution tar file of GCC version 1.40 unpacks into a subdirectory named gcc-1.40.
The easiest way to do this is to create a subdirectory appropriately
cp to install the proper files in it, and
tar that subdirectory.
Compress the tar file with
gzip. For example, the actual
distribution file for GCC version 1.40 is called gcc-1.40.tar.gz.
It is ok to support other free compression formats as well.
dist target should explicitly depend on all non-source files
that are in the distribution, to make sure they are up to date in the
See Making Releases in GNU Coding Standards.
Perform self-tests (if any). The user must build the program before running the tests, but need not install the program; you should write the self-tests so that they work when the program is built but not installed.
The following targets are suggested as conventional names, for programs in which they are useful.
Perform installation tests (if any). The user must build and install the program before running the tests. You should not assume that $(bindir) is in the search path.
It’s useful to add a target named ‘installdirs’ to create the directories where files are installed, and their parent directories. There is a script called mkinstalldirs which is convenient for this; you can find it in the Gnulib package. You can use a rule like this:
# Make sure all installation directories (e.g. $(bindir)) # actually exist by making them if necessary. installdirs: mkinstalldirs $(srcdir)/mkinstalldirs $(bindir) $(datadir) \ $(libdir) $(infodir) \ $(mandir)
or, if you wish to support
DESTDIR (strongly encouraged),
# Make sure all installation directories (e.g. $(bindir)) # actually exist by making them if necessary. installdirs: mkinstalldirs $(srcdir)/mkinstalldirs \ $(DESTDIR)$(bindir) $(DESTDIR)$(datadir) \ $(DESTDIR)$(libdir) $(DESTDIR)$(infodir) \ $(DESTDIR)$(mandir)
This rule should not modify the directories where compilation is done. It should do nothing but create installation directories.