Actions

EmSys

TM4C123GXL GPIO - Configure each pad in the port to have pull-up-pull-down-open drain

From EdWiki

Revision as of 05:21, 3 June 2019 by Jshankar (Talk | contribs) (Created page with "__NOTOC__ == GPIO - Configure each pad in the port to have pull-up, pull-down, or open drain == Optionally, you can configure each pad in the port to have pull-up, pull-down,...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

GPIO - Configure each pad in the port to have pull-up, pull-down, or open drain

Optionally, you can configure each pad in the port to have pull-up, pull-down, or open drain function through the GPIOPUR, GPIOPDR , or GPIOODR register. Slew rate may also be configured, if needed, through the GPIOSLR register.