TM4C123GXL GPIO - Setup the drive strength for each pin
From EdWiki
Revision as of 05:18, 3 June 2019 by Jshankar (Talk | contribs) (Created page with "__NOTOC__ == GPIO - Setup the drive strength for each pin == Optionally, you can setup the drive strength for each pin through the GPIODR2R, GPIODR4R, or GPIODR8R registers. T...")
GPIO - Setup the drive strength for each pin
Optionally, you can setup the drive strength for each pin through the GPIODR2R, GPIODR4R, or GPIODR8R registers. This step is optional since the default drive strength is 2 mA.