Using GCC with Tiva TM4C123G LaunchPad in CCSv6

Install Code Composer Studio

Code Composer Studio v8.1.0 includes a Linaro distribution of the ARM GNU compiler, so programmers have the option of using this GCC Compiler instead of the TI compiler to build their projects.

Objective

The objective of this lab exercise is to download and install Code Composer Studio, as well as download the various other support documents and software to be used with this course. These development tools will be used throughout the remaining lab exercises in this course.

CCS v8 - Hardware Requirements

	Memory	Recommended
Memory	2GB	6GB
Disk Space	900MB	2GB average (1 or 2 device families) 3.5GB all features
Processor	1.0GHz x86 compatible processor	Dual core x86 compatible processor

Table: CCS v8 - Hardware Requirements

• Disk space listed depends on features selected during installation. 900MB is for a bare minimal installation. Does not include temporary space required by the installer.
• Note that the most important requirement is memory. At least 4GB of memory or more is highly recommended.

CCS v8 - Operating System Requirements

Windows:

Windows 7 (SP1 or later), Windows 8.x and Windows 10

Ubuntu 18.04 LTS:

update system:

sudo apt-get update

Install dependent libraries:

sudo apt-get install libc6-i386 libusb-0.1-4 libgconf-2-4 build-essential

► Install Code Composer Studio - Windows

► Install Code Composer Studio - Ubuntu

► Install TivaWare™ for C Series - Windows

► Install TivaWare™ for C Series - Ubuntu

► Install/Upgrade ICDI Device Drivers - Windows