Actions

EmSys

Difference between revisions of "VSCode Cortex-Debug Launch Configurations"

From EdWiki

m (Parameters)
m (VSCode Cortex-Debug Launch Configurations)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
 
== VSCode Cortex-Debug Launch Configurations ==
 
== VSCode Cortex-Debug Launch Configurations ==
'''Cortex-Debug''' is an extension for [https://code.visualstudio.com/ Visual Studio Code] to streamline the debug process when working with ARM Cortex-M microcontrollers. This document covers writing launch configurations ('''launch.json''').
+
[https://marketplace.visualstudio.com/items?itemName=marus25.cortex-debug Cortex-Debug] is an extension for [https://code.visualstudio.com/ Visual Studio Code] to streamline the debug process when working with ARM Cortex-M microcontrollers. This document covers writing launch configurations ('''launch.json''').
  
 
* Open the VSCode user settings file ''settings.json'': '''File → Preferences → Settings'''
 
* Open the VSCode user settings file ''settings.json'': '''File → Preferences → Settings'''
Line 41: Line 41:
 
* '''source''': Source for SWO data. Can either be “probe” to get directly from debug probe, or a serial port device to use a serial port external to the debug probe.
 
* '''source''': Source for SWO data. Can either be “probe” to get directly from debug probe, or a serial port device to use a serial port external to the debug probe.
 
* '''decoders''': SWO Decoder Configuration
 
* '''decoders''': SWO Decoder Configuration
* '''labe'''l: A label for the output window.
+
* '''label''': A label for the output window.
 
* '''port''': ITM Port Number
 
* '''port''': ITM Port Number
  

Revision as of 14:01, 11 April 2022

VSCode Cortex-Debug Launch Configurations

Cortex-Debug is an extension for Visual Studio Code to streamline the debug process when working with ARM Cortex-M microcontrollers. This document covers writing launch configurations (launch.json).

  • Open the VSCode user settings file settings.json: File → Preferences → Settings
  • Select User settings:
    Enter "json" in the search bar (with or without double quotes). Locate a link "Edit in settings.json" and click on it. This will open the file ~/.config/Code/User/settings.json
  • Add the following lines to the settings.json file, between the curly braces {}:

    "cortex-debug.openocdPath": "/usr/bin/openocd",
    "cortex-debug.armToolchainPath.linux": "/opt/toolchains/gcc-arm- none-eabi-10.3-2021.10/bin",
    "cortex-debug.armToolchainPath.windows": "C:\\ProgramData\\chocolatey\\bin",
    "cortex-debug.gdbPath.linux": "/opt/toolchains/gcc-arm-none-eabi-10.3-2021.10/bin//arm-none-eabi-gdb",
    "cortex-debug.gdbPath.windows": "C:\\ProgramData\\chocolatey\\bin\\arm-none-eabi-gdb.exe"


Please note: The paths on your system might be different. Make sure the path matches your actual file locations.

  • Save the file settings.json

OpenOCD GDB Server (servertype : openocd)

We modify launch.json to configure debug features.

Parameters

Here is a list of parameters in launch.json. Configure them for your specific device and environment.

  • cwd: Path of project
  • configFiles: OpenOCD configuration file(s) to load
  • device: Target Device Identifier
  • interface: Debug Interface type to use for connections (defaults to SWD) - Used for J-Link and BMP probes.
  • name: Name of configuration; appears in the launch configuration dropdown menu.
  • preLaunchTask: Task to run before debug session starts. Specify a task defined in tasks.json.
  • request: Request type of configuration. Can be “launch” or “attach”.
  • runToEntryPoint: If enabled the debugger will run until start of the main function.
  • serialNumber: J-Link specific parameter. J-Link Serial Number - only needed if multiple J-Links are connected to the computer
  • servertype: GDB Server type - supported types are jlink, openocd, pyocd, pe and stutil
  • svdFile: Path to an SVD file describing the peripherals of the microcontroller; if not supplied then one may be selected based upon the ‘device’ entered. This may be automatically loaded depending on the "device".
  • swoConfig: SWO/ITM configuration.
  • enabled: Enable SWO decoding.
  • cpuFrequency: Target CPU frequency in Hz.
  • swoFrequency: SWO frequency in Hz.
  • source: Source for SWO data. Can either be “probe” to get directly from debug probe, or a serial port device to use a serial port external to the debug probe.
  • decoders: SWO Decoder Configuration
  • label: A label for the output window.
  • port: ITM Port Number


Below is an example of a basic launch configuration using the OpenOCD GDB server.

In this configuration the device parameter is not required - but can be supplied to allow auto-selecting an appropriate SVD file if possible.

There is one OpenOCD specific parameter that must be supplied. The configFiles property takes an arrays of strings that are used to load openocd configuration files. These can either be a files in the openocd search path (like in this example), or a full path to your own configuration file. If you are using OpenOCD supplied files you typically will have either one file from the board section, or a file from the interface section and a file from the target section.

  • Open the VSCode launch configuration file launch.json: Run → Add Configuration...
  • Copy the following code
{
    // Use IntelliSense to learn about possible attributes.
    // Hover to view descriptions of existing attributes.
    // For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
    "version": "0.2.0",
    "configurations": [
        {
            "name": "Debug (OpenOCD)",
            "cwd": "${workspaceRoot}",
            "executable": "${workspaceRoot}/build/blinky.elf",
            "request": "launch",
            "type": "cortex-debug",
            "servertype": "openocd",
            "interface": "swd",
            "device": "TM4C123GH6PM",
            "runToEntryPoint": "main",
            "svdFile": "${workspaceRoot}/svd/TM4C123GH6PM.svd",
            "configFiles": [
                "board/ek-tm4c123gxl.cfg"
            ],
            "preLaunchCommands": [
                "set mem inaccessible-by-default off",
                "monitor reset"
            ],
            "postLaunchCommands": [
                "monitor reset init",
                "monitor sleep 200"
            ]
        }
    ]
}


  • Change "executable", "svdFile", and "device" parameter as appropriate and save it
  • SVD Files: The “svdFile” entry in the launch.json file is optional, but crucial to embedded system debugging because it describes the device peripheral registers.

References

Coretex-Debug

OpenOCD