Actions

EmSys

Install Code Composer Studio v6 Ubuntu

From EdWiki

Revision as of 05:14, 1 June 2018 by Jshankar (Talk | contribs) (Installation Instrweb_linuxuctions)

Install Code Composer Studio - Ubuntu

Prerequisites

Resolve Dependencies, before proceeding to Installation Instructions.

libc6:i386

Ubuntu 18.04 LTS

  • update system: sudo apt-get update
  • Install dependent libraries: sudo apt install libc6:i386 libusb-0.1-4 libgconf-2-4 build-essential

Ubuntu 16.04 LTS

Starting with this version of new CCSv6.2.0, the application is natively 64-bit and only requires one 32-bit library installed.

From a terminal prompt, issue the following command to install it:

host@user$ sudo apt-get update
host@user$ sudo apt-get install libc6:i386

This is due to the fact Linux 64-bit versions of the TI compilers were not yet ready.


Ubuntu 15.04 64bit

host@user$ sudo apt-get update
host@user$ sudo apt-get install libc6:i386 libx11-6:i386 libasound2:i386 libatk1.0-0:i386 \
libcairo2:i386 libcups2:i386 libdbus-glib-1-2:i386 libgconf-2-4:i386 libgcrypt11:i386 \
libgdk-pixbuf2.0-0:i386 libgtk-3-0:i386 libice6:i386 libncurses5:i386 libsm6:i386 \
liborbit2:i386 libudev1:i386 libusb-0.1-4:i386 libstdc++6:i386 libxt6:i386 libxtst6:i386 \
libgnomeui-0:i386 libusb-1.0-0-dev:i386 libcanberra-gtk-module:i386 gtk2-engines-murrine:i386 unzip

Ubuntu 14.04 64bit

host@user$ sudo apt-get update
host@user$ sudo apt-get install libc6:i386 libx11-6:i386 libasound2:i386 libatk1.0-0:i386 \
libcairo2:i386 libcups2:i386 libdbus-glib-1-2:i386 libgconf-2-4:i386 libgdk-pixbuf2.0-0:i386 \
libgtk-3-0:i386 libice6:i386 libncurses5:i386 libsm6:i386 liborbit2:i386 libudev1:i386 \
libusb-0.1-4:i386 libstdc++6:i386 libxt6:i386 libxtst6:i386 libgnomeui-0:i386 \
libusb-1.0-0-dev:i386 libcanberra-gtk-module:i386 gtk2-engines-murrine:i386 unzip

Installation Instrweb_linuxuctions

There are two types of installers:

Web installers will allow you to perform an install using an installer controlled download process that will only download needed software components. An internet connection is mandatory at install time. Obtain it from your instructor or Download it from here

Off-line installers are a large archive (about 800MB). When you run it you can select the components to be installed. No internet connection is required at install time. The executable can be used for installing multiple local systems. Obtain the it from your instructor or Download it from here

► Simply save the file and untar.

host@user:~/Downloads$ tar xvf CCS8.0.0.00016_web_linux-x64.tar.gz

If you download the Web Installer

host@user:~/Downloads$ tar xvf CCS8.0.0.00016_linux-x64.tar.gz

If you download the Off-line installer.

► Run ccs_setup_linux64_8.0.0.00016.bin as a normal user, in the folder created when you unzipped the download. This will start the CCS install wizard.

host@user:~/Downloads/CCS7.4.0.00015_linux-x64$ ./ccs_setup_linux64_8.0.0.00016.bin
  1. Accept the Software License Agreement and click Next.
  2. Unless you have a specific reason to install CCS in another location, accept the default installation folder and click Next. If you have another version of CCS and you want to keep it, we recommend that you install this version into a different folder.
  3. In the next dialog, select the processors that your CCS installation will support. Place a checkmark under "TM4C12x ARM Cortex M4F core based MCUs" --> click Next
  4. Please Note the Unsupported boards, click Next
  5. In the Select Debug Probes, leave everything as default and click Next

If everything looks good, click Finish to start your install!

Note: If you have an issue with the web installer not being able to connect to the internet then please try the off-line installer.

Please have patience as It takes some time to do all the work. When the installation is complete, check the “Create Desktop shortcut” checkbox and then click Finish button.

Install Drivers

Once CCS installation has completed, navigate to directory <Install-Folder>/ccsv8/install_scripts.

host@user:~$ cd ~/ti/ccsv8/install_scripts/

As root, execute script "install_drivers.sh".

host@user:~/ti/ccsv8/install_scripts$ sudo ./install_drivers.sh


Prev.gif
Next.gif
Home.gif